Boat launching with 2021 Hyundai Palisades SEL

captrob

New Member
Messages
3
Reactions
0
#1
Has anyone launched or pulled their boat out on a ramp with their Palisades?. I have a Robalo R200 weighing around 3000# with trailer.
 

Gene

Member
Messages
204
Reactions
44
#2
Do you have AWD or FWD
 
OP
C

captrob

New Member
Messages
3
Reactions
0
Thread Starter #3
FWD. Also I just saw that I have the 4-pin factory installed hitch connector. I told them I was towing a boat.
 

Gene

Member
Messages
204
Reactions
44
#4
I know people who tow their boat and use a ramp to launch and remove their boat from lakes.
They all have HTRAC and had no problems.
I would say with FWD it would all depend on the angle of the ramp, condition of ramp and how wet it is
Hope someone on here uses their FWD for a boat.
4or7 Pin depends on weight of boat, and does your trailer have electric brakes?
The 4 pin can be changed to 7 pin by using connector, with controller and running a 12 V wire from
front bake to the same 4 pin built in connection.
There are instructions posted on here by others.
 
OP
C

captrob

New Member
Messages
3
Reactions
0
Thread Starter #5
I know people who tow their boat and use a ramp to launch and remove their boat from lakes.
They all have HTRAC and had no problems.
I would say with FWD it would all depend on the angle of the ramp, condition of ramp and how wet it is
Hope someone on here uses their FWD for a boat.
4or7 Pin depends on weight of boat, and does your trailer have electric brakes?
The 4 pin can be changed to 7 pin by using connector, with controller and running a 12 V wire from
front bake to the same 4 pin built in connection.
There are instructions posted on here by others.
Yes the trailer has brakes.
 

Gene

Member
Messages
204
Reactions
44
#6
Up grade to 7 pin connector with controller
 

Hyundai Palisade Posts



Top